Stock
Here you can search specifically for separators, decanters, centrifuges and other products or in different combinations of types, designations and manufacturers. The picture may differ from the actual version.
If you don't find the desired machine, please contact us.
Type: CA 458-00-12
Manufacturer: GEA Westfalia Separator
Description: Two-Phase-Decanters
Bowl diameter: 458
Bowl design: Flat angle design
L/D ratio: Extended
Housing design: Normal design
Liquid discharge: Gravity discharge of liquids
Type of drive: V-belt drive with clutch
Type of conveyor drive: Drive variable
![banner claiming 100% quality check](/files/themes/centrimax/page/images/quality-check.jpg)
Applications:
The GEA Westfalia Separator decanter centrifuges are designed especially to operate in separation jobs, where high demands are put to continous separation of solids from suspensions with very high solids content. This means clarification of liquids, concentration of solids or classification of solids according to particle size. The fields of application are in the chemical and pharmaceutical industries, starch industry, fish and fat processing industries, food and beverages industries and in waste water treatment plants.
Technical Data:
Length: | 3000 – 4000 mm |
L/D ratio: | 3,2 – 4,4 |
Weight: | 2680 – 3370 kg |
Volume aprox.: | 5 – 35 m³/h |
Bowl speed: | up to 3400 rpm |
Number of g's max.: | up to 2900 g |
Drive-System:
The decanter is driven by a low-noise three-phase AC motor. Power is transferred to the bowl via V-belts. The conveyor screw is also driven via V-belts and a Cyclo gear. The V-belts pulleys can be exchanged so as to produce various speed differentials. The main bowl bearings, the conveyor screw bearings and the Cyclo gear are lubricated with grease. The drive motor is installed beneath the bowl between the feet to save space and is dampened against vibrations.
Send us an inquiry for this machine: CA 458-00-12
Not in stock - request alternative machine +49(0)2236-393530 info@centrimax.com Share on WhatsAppYour advantages
- Over 60 years of experience
- Remanufacturing (factory rebuilt)
- PLC-based control system
- First class quality
- Inhouse test laboratory
- Savings up to 70%
- Commissioning/process integration
- Centrimax warranty
- After sales service
- Manufacturer-independent
If you don't find the desired machine, please contact us.